1.
2.
3.
4.
5.
6.
CRS354-48P-4S+2Q+RM
The CRS354 is a network switch with 48 Gigabit ports supporting PoE out for your devices, four 10G SFP+ ports, two 40G QSFP+ ports. The device is
ready to use as a switch.
Quick start
The device has all interfaces switched.
Mount unit in a rackmount cabinet or place on the flat surface (see "
Connect the device to the AC source using a power cord.
Set the IP address of your PC to 192.168.88.3
Use a Web browser to connect to the default IP address of 192.168.88.1 from any port, with the username
and no password.
admin
If IP is not available to download Winbox from our webpage and use it to connect through MAC address.
Update RouterOS software to the latest version, make sure that the device has an internet connection.
Find the latest (mipsbe) software and choose your packages.
Download packages to the PC and upload them to the Winbox, Files menu, and reboot the device.
Set up your password to secure the device.
Mounting
The device is designed to use indoors and it can be mounted in a rackmount enclosure using provided rack mounts, or it can be placed on the desktop.
Use a Phillips screwdriver to attach rackmount ears on both sides of the device and for both sides of the back of the device if designated use is for
rackmount enclosure:
Attach the bracket to the front right side.
Attach the rear right bracket.
Attach the bracket to the left front side.
Attach the rear left bracket.
Attach long brackets to the rackmount and install the device with the holes so that the device fits conveniently.
If needed, install cable management brackets.
