6
Usage
Please read all user instructions prior to operating your Yoisho massager.
IMPORTANT: Do not stand inside the unit or apply excessive pressure to the massager.
This may significantly slow down or stop the motor, causing the unit to overheat.
1. Connect the adapter to the massager, then plug into the wall outlet. The power button
will start flashing red.
2. Choose a comfortable chair of equal height. Place your legs into the slots and relax.
3. Press the power button to turn the massager on. The unit will beep one time and
start with P1(Pressure level 1) and the Heat Mode on. The LCD will start a 15-minute
countdown.
4. There are a total 5 pressure levels. P1 is the lowest and P5 is the highest.
Press the + button to increase the massage intensity and press the - button to decrease
the massage intensity.
P1: Lowest level, - button will be SOLID light, LCD displays P1
P2: Second level, - button will be FLASH light, LCD displays P2
P3: Third level, - button and + button will be FLASH light, LCD displays P3
P4: Fourth level, + button will be FLASH light, LCD displays P4
P5: Fifth level, + button will be SOLID light, LCD displays P5
5. You will feel the air pressure increasing and then releasing during the duration of the
massage. For optimal massage experience, you will feel the change of direction and
type of massage. During the massage, feel free to change levels by pr and -
buttons according to your comfort level.
6. The heat will gently rise up to the perfect temperature in a few minutes. You can turn
the heat off any time by pressing the Heat Mode button. ( The red light will be off
indicating that the heat function is off)
7. To turn the unit off at any time, just press on the power button. The next time you turn
it back on, it will start a new 15-minute massage session with P1 and heat on.
8. Unplug the unit when done using the massager.
•
Before cleaning, always make sure to turn off the unit from the control panel first, then
unplug from the electrical outlet.
•
Do not use any abrasive cleaners when cleaning the unit.
•
Use a dry cloth when cleaning the massager. Never use the damp cloth to clean the
control panel and massager unit.
•
When not in use for a long time, store the massager in a dust and moisture free
environment with the cord coiled. Do not wrap the cord around the unit.
•
Do not leave the unit under direct sunlight for an extended period of time.
• Do not store the massager unit near the heat source.
•
If the massager unit malfunctions or breaks down, never try to repair it yourself, contact
MIKO service center.
Care and Storage
