7
Getting Start
Charging the Battery
This Video Camera is operated by a lithium battery which is built-in
inside the housing. Before first use this Video Camera or when the
battery is in low power status, please correctly charge the battery as
per below steps:
1. Press and hold the “Power” button, turn the Video Camera off.
2. Connect the Video Camera to the one end of USB cable, then
connect another end of USB cable to a computer.
The camera screen shall display three icons: “USB Mode”, “PC
Camera” and “Charging Mode”.
Please press “WiFi” button to move cursor to “Charging Mode”, then
press “Power/Shutter” button of camera to enter charging mode.
3. When charging starts, the Charging Indicator will turn on in red
color and flicker continuously.
Note:
When charging starts, the Video Camera may switch on
automatically as the Video Camera includes a car camcorder
function (if the camera connected to a car charger it will be turned
on when car engine starts). In this case, please switch off the Video
Camera if you do not need this car camcorder “auto-on” function.
3.Once charging completes, the Charging Indicator will keep steady
in red color. Unplug the USB cable.
CAUTION:
If you choose to use a wall (car) charger output to USB for charging
of this video camera, it’s your responsibilities to make sure the
charger is properly approved/certified according to National
Standards, for example, in USA, certified by UL, ETL, etc.; and you
must make sure the charger’s output voltage and current is in line
with the specification mentioned on the rating label of this camera,
which is affixed on bottom of camera and near Tripod Slot.
