7.3 Program memory settings
Personnel:
n
Trainer
1.
Open the
“Setup”
menu tab.
2.
Open the
“Program memory settings”
main menu item
Further information on page 59
.
ð
The
“Program memory settings”
opens.
You can set the following parameters in the
“Program memory
settings”
menu:
n
Name:
Defines a custom name for the training program. Instruc-
tions on how to write names
Further information on page 59
.
n
Training time:
Specifies the total training time.
n
Pulse time:
Specifies the duration for which pulses will be
emitted. The pulse time is indicated in seconds.
n
Pause time:
Specifies the time in between pulses. Pause time
is indicated in seconds.
n
Frequency:
The pulse frequency in Hz indicates how many
individual pulses will be emitted per contraction phase.
n
Pulse width:
Specifies the length of an individual pulse. The
longer the pulse width, the deeper the pulse will penetrate the
muscle tissue. The pulse width is indicated in microseconds.
n
Rise time:
Specifies the time that will elapse between the
beginning of the pulse to the pulse reaching its peak.
n
Save program:
Saves the program on the device. Once saved,
a program can no longer be modified or deleted. It can only be
deactivated. It will then only be displayed in the training plan
memory settings and program memory settings. The program
can be activated again in these settings.
The
“Program memory settings”
menu displays in numerical order
all training programs that have been created.
While you can view the programs’ memory settings by selecting
them, you will not be able to modify or delete them.
7.4 Setting up the training plan memory
Personnel:
n
Trainer
1.
Open the
“Setup”
menu tab.
ð
The
“Setup”
menu tab opens.
2.
Turn the multi-function button to the right to select the
“Set
up training plan memory”
menu item.
ð
The
“Set up training plan memory”
menu item is
selected.
Displaying the program memory
Menu items
Viewing/creating training plan
memory
Customization and setup
2021-07-28
miha-bodytec m.ove EMS training device
63