If favorites have been selected, only these favorite workouts will be
displayed in the card management menu.
You use the data backup function to create a backup copy of the
device settings and programs as well as of the training plans on an
external device (USB flash drive). You can use the “Restore” func-
tion to transfer device settings and/or programs and training plans
(depending on your selection) to other devices.
Use only the genuine USB flash drives supplied by the manufac-
turer on the USB port of the device.
With synchronized start, one device is assigned a managing func-
tion. This device controls the training procedure for all other
devices involved and is referred to as the master device. Devices
participating in the synchronized start that are not master devices
are referred to as managed devices.
The athlete/patient must strictly adhere to the instructions of the
trainer. If physical or device-specific problems arise during training,
notify the trainer immediately and follow the trainer’s instructions.
To ensure the trainer and persons training can communicate as
required, the managed devices must be oriented towards the
master device to allow the trainer to monitor each person training.
To ensure that training with synchronized start is effective and safe,
a maximum of 2 persons training per trainer is recommended.
Risk of injury due to incorrect input of brand codes!
– Never enter brand codes yourself.
– If you want to use brand codes, contact Customer Service
(
“Customer service” on page 16).
If brand codes are entered without adequate background
knowledge, athletes can be injured due to malfunctions or
incorrect parameterization and the device can be damaged.
The brand code (parametrization) is used to select or import
default factory settings, e.g., color settings, graphic displays, and
network functions. This selection option may only used by service
employees of miha bodytec or under their supervision.
The
“i-body connect wireless”
menu item can be used to switch
the Bluetooth
®
connection to the i-body
®
connect wireless device
on and off.
In the event of faults in a connected i-body
®
connect wireless,
device information such as serial number, firmware, and error
codes can be output. This is important information for the service
employee at miha bodytec. Moreover, the
“Perform self-test”
and
“Export log”
functions can be performed under the guidance of our
service employee.
Data backup/restoration
Master device/managed device
Brand code
L
WARNING
i-body
®
connect wireless
Understanding the device
2021-07-28
miha-bodytec m.ove EMS training device
53