Personnel:
n
Athlete/Patient
Materials:
n
Transponder card
1.
Place the transponder card in the main menu on the desig-
nated contact surface.
ð
The system automatically switches to the selection of the
workouts stored on the transponder card. The
“Card
management”
menu shows the programs/training plans
stored on the transponder card and allows you to select
them using the multi-function button.
2.
Press the multi-function button again to start the program/
Chapter 10.5 “Training” on page 94
).
3.
Complete your training or press the multi-function button
again to terminate the workout prematurely.
4.
Remove the transponder card. To do so, press the lower end
of the transponder card and slide it upward.
Personnel:
n
Trainer
Materials:
n
Transponder card
1.
Remove the transponder card if a card is currently inserted in
the device.
2.
Use the multi-function button to select the
“Card
management”
menu item.
3.
Place the transponder card on the designated contact sur-
face and change its settings as needed.
4.
Use the multi-function button to select
“Write card”
.
ð
The changes will be saved on the transponder card.
5.
Remove the card from the designated contact surface.
ð
The data on the transponder card has been changed.
After the device has been set up as a master or managed device,
the user settings for every athlete have to be defined as well.
These user settings are linked to the transponder card associated
with the athlete. This ensures that athletes will only participate in
the training with synchronized start if they wish to do so.
Using the transponder card
Changing data on the transponder
card
Setting up the transponder card for
training with synchronized start
Overview of programs/training plans
2021-07-28
miha-bodytec m.ove EMS training device
100