3
3
2
4
1
Fig. 3: Control unit (underside)
1
On/off switch
2
Power supply connection incl. cover
3
USB port
4
Rechargeable battery
The on/off switch (Fig. 3/1) is embedded in the case on the under-
side of the control unit. A built-in terminal strip is located in a
depression on the underside, which is protected by a service cover.
The supply cable of the power supply unit is connected to the
power supply connection (Fig. 3/2) by means of a magnetic plug
connection.
The miha bodytec USB flash drive can be inserted into the USB
port (Fig. 3/3) for performing updates and for saving device set-
tings.
The rechargeable battery (Fig. 3/4) located in a designated
rechargeable battery compartment incl. connector is used to supply
power without a power supply during mobile use.
1.2 Equipment
Using equipment not obtained from miha bodytec or authorized
dealers represents an increased safety risk. Only use genuine
miha bodytec equipment.
It is not allowed to connect additional parts not mentioned in this
manual to the device, the electrodes or the cables.
Control unit (underside)
Safety thanks to genuine miha
bodytec equipment
Overview and scope of delivery
2021-07-28
miha-bodytec m.ove EMS training device
10