The supply cable of the power supply unit is connected to the
power supply connection (Fig. 4/2) by means of a safety plug con-
nector with a detent mechanism. To disconnect, the detent mecha-
nism must be released by pulling back the plug grip.
The socket of the connection cable (Fig. 4/3) is used to attach the
connection cable of the electrode vest, hereinafter referred to as
“i-body
®
“. The miha bodytec USB flash drive can be inserted into
the USB port (Fig. 4/4) for performing updates and for saving
device settings.
A speaker (Fig. 4/5) is located behind the perforations in the case.
The device uses the speaker to output acoustic signals that pro-
vide information on inputs and device status
1.2 Equipment
Using equipment not obtained from miha bodytec or authorized
dealers represents an increased safety risk. Only use genuine
miha bodytec equipment.
Additional parts not mentioned in this manual must not be con-
nected to the device, the electrodes or the cables.
Transponder card for storing the last values, individual time specifi-
cation, and individually adjusted program.
Safety thanks to genuine miha
bodytec equipment
Transponder card
Fig. 5: Transponder card
Overview and scope of delivery
2021-07-28
miha-bodytec II EMS training device
11
Содержание BODYTEC II
Страница 1: ...miha bodytec II Operating instructions US...
