Mienta GS42709A, Инструкция по эксплуатации

Страница: 8 / 32

8 Instruction Manual
B. Filling the water tank
. 1 Make sure that the appliance is unplugged.
. 2 Place the garment steamer on its base on a stable surface.
. 3 Remove the tank by pressing both left and right tank release
buttons and pull the tank to the outside (Fig.3).
. 4 Gently open the tank cover at the front of the tank (Fig. 4).
5. Using a clean measuring cup, pour water into the opening
until water reaches the “MAX” level mark on the top of the
tank (Fig.5), do not overfill. Close the rubber cover carefully.
NOTE: Using distilled, purified, or filtered water is highly
recommended and will reduce the mineral which accumulate
on the heating element. Do not use oils, perfumes, or scented
additives.
6. Dry off any excess water from the tank. Push the water
tank back into the garment steamer base, a “CLICK”
sound will be heard indicating proper installation.
7. To refill at any time during use, unplug from outlet, and
follow the above procedure.
C. How to iron?
Helpful notes before ironing
1. Follow the manufacturers fabric label to make sure the fabrics are suitable for
steaming.
Ÿ
If you see “do not iron” or this icon , do not press the steam nozzle
against the garment. Instead attach the fabric brush and make sure to test on
an inconspicuous area prior to steaming the entire garment.
Ÿ
If you see “do not steam” or this icon , do not steam the garment.
2. Refer to the “Attaching the fabric brush” paragraph to determine whether to use the
fabric brush or not. Attach and remove the brush when the steamer and brush are
cool.
Fig.4
Fig.5
Fig.3