Miele WXR 860 Скачать руководство пользователя страница 105 | Manualshive

Страница: 105 / 116

Miele WXR 860 Скачать руководство пользователя страница 105

Settings

105

SmartGrid

The

SmartGrid

setting is only visible if

the

Miele@home

setting is set up and

activated.

This function can be used for starting
your washing machine automatically
at a time when your energy supplier's
energy costs are most economical.

Activating

SmartGrid

gives the

Timer

sensor button a new function.

Use the Timer sensor button to set

SmartStart

. The washing machine will

then start within the timeframe specified
by you when it receives a signal from
your energy supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the washing machine will start
automatically (see “Delay start”).

SmartGrid is deactivated as standard.

Remote Control

The

Remote Control

setting is only

visible if the

Miele@home

setting is set

up and activated.

Once the Miele app has been installed
on your mobile device, you can check
the status of your washing machine
from anywhere and start it remotely.
You can also control it remotely via the

MobileStart

program.

You can switch off the

Remote

Control

setting if you do not want to

operate the washing machine with your
mobile device.

If

Remote Control

is not switched on, the

app can still be used to cancel a
program.

Use the Timer sensor button to set a
timeframe within which you want to
start the washing machine, and start
the timer (see “Timer”).
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.

Remote control is activated by default.

«
...
103
104
105
106
107
...
»

Содержание WXR 860





















































































































Отзывы:

Нет отзывов