Miele WXD 160 Скачать руководство пользователя страница 17

Страница: 17 / 88

Before using for the first time

3. Starting the calibration
program

For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.

To do this, the

Normal

program

must

be run without laundry and without
detergent.



Turn on the faucet.



Turn the program selector to the

Normal

position.

The washing machine is now switched
on and the temperature

Warm

+ and

spin speed

Max

light up.



Touch the Start/Add laundry sensor
button.

The wash program will start.

After 15 minutes, the indicators dim.

Opening the door at the end of the
program

The door remains locked during the
Anti-crease phase. The control field
lights up for the first 10 minutes. The
control field then goes out and
the

Start

Add laundry

sensor button

flashes.



Turn the program selector to the



position.



appears on the time display and the



indicator light goes out.

The door will be unlocked.

Tip:

After the Anti-crease phase, the

washing machine will have switched off
and the door unlocked automatically.
The control field is completely dark.



Take hold of the door and pull it
open.

Tip:

Leave the door slightly open to

allow the drum to dry.

The appliance is now ready for use.

Содержание WXD 160

























































































Результаты поиска

Содержание WXD 160

Отзывы:

Похожие инструкции для WXD 160

Бренды по названию

Популярные бренды

Miele WXD 160, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание WXD 160

Отзывы:

Похожие инструкции для WXD 160

Бренды по названию

Популярные бренды