Miele WWR 860 WPS, Руководство по эксплуатации

Страница: 26 / 116

Before using for the first time
26
6. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:

Turn on the tap and run the “Cottons
90°C” programme without any laundry

Confirm with the OK sensor.
The display will switch to the standard
display for the
Cottons programme.
 11:02
90 °C 1600

1:57
Cottons
h
Overview
Temperature Spin speed
TwinDos Extras
not selected Whites
 Timer  Save
rpm

Touch the Start/Stop sensor.
The calibration programme is started. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:

Set-up completed

Take hold of the door and pull it
open.
Useful tip: For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.

Switch the washing machine off with
the
 sensor.