Before using for the first time
23
5. Commissioning TwinDos
Skip
Continue
Set up “TwinDos”?
Touch the
Continue
sensor to set up
TwinDos straight away.
Useful tip:
To postpone setup until
later: touch the
Skip
sensor. The
following message will appear in the
display:
It is possible to set up later in “Settings” /
“TwinDos”.
Confirm with the
OK
sensor.
Settings for compartment
The procedure below describes the
procedure for Miele UltraPhase 1 and
Miele UltraPhase 2. The procedure for
other detergents is similar.
No agent
Agent for comp.
Miele
UltraPhase 1
Universal
detergent
Colour
detergent
Delicates
detergent
Delicates/
Woollens
OK
11:02
Touch the
Miele UltraPhase 1
sensor.
The following message will appear in
the display:
Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase 1 for
(hardness range
I)
is preset.
46
45
44
47
48
Dosage for comp.
ml
OK
11:02
Confirm the preset value with the
OK
sensor, or change the value.
UltraPhase 1
Hardness level I
46 ml
Hardness level II
58 ml
Hardness level III
70 ml
The following appears in the display:
Insert container
Содержание WWR 860 WPS
Страница 116: ...M Nr 11 624 160 03 en AU NZ WWR 860 WPS ...