Miele WWI 860 Скачать руководство пользователя страница 98

Страница: 98 / 108

Settings

Disp. switch-off stat.

The display and the sensor control
lighting is switched off to save energy.
The

Start/Add laundry

sensor flashes

slowly.

Options

–

(factory setting)

The lighting switches off after
10 minutes.

–

On (not current pr.)

The lighting remains switched on
throughout the programme. The
lighting switches off 10 minutes after
the programme has ended.

–

Off

The lighting remains switched on.

Programme info

You can select the information that will
be displayed temporarily in the display
after a programme has been selected.

Options

–

Programme name

The programme name is shown in the
display for several seconds.

–

Prog. & max load

(factory setting)

The programme name and the
maximum load are shown in the
display for several seconds.

–

Off

Directly after the programme has
been selected, the standard display
is shown with temperature, spin
speed, and programme duration.

Memory

The washing machine will save the
last settings (temperature, spin speed
and some of the Extras) selected for a
programme after the programme has
started.

When the programme is selected again,
the saved settings will appear in the
display.

Memory is deactivated as standard.

Water intake

You can programme the washing
machine to hot water operation.

Options

–

Cold water

(factory setting)

The washing machine will be
operated with cold water only.

–

Hot water 

If the wash temperature exceeds
30°C, the wash temperature in the
main wash is achieved by mixing
cold and hot water.

Содержание WWI 860













































































































Результаты поиска

Содержание WWI 860

Отзывы:

Похожие инструкции для WWI 860

Бренды по названию

Популярные бренды

Miele WWI 860, Руководство по эксплуатации

Результаты поиска

Содержание WWI 860

Отзывы:

Похожие инструкции для WWI 860

Бренды по названию

Популярные бренды