manualshive.com logo in svg

Miele WWI 860 WPS, Руководство по эксплуатации, Страница: 20 / 112

Поделиться
Скачать
Miele WWI 860 WPS Скачать руководство пользователя страница 20

Before using for the first time

20

3. Remove the transit bars

Damage resulting from failure to

remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation and connection”.

The following message appears in the
display:

 

Remove transit bars

Confirm with the 

OK

 sensor control.

4. Commissioning TwinDos

The UltraPhase 1 and UltraPhase 2
values are preset in the standard
settings and only need to be confirmed.

The following message appears in the
display:

 

TwinDos

Confirm with the 

OK

 sensor control.

The following message appears in the
display:

Set now

To set up TwinDos now, touch the 

OK

sensor control.

To postpone setup until later: touch
the 

 sensor control until the

following appears in the display: 

Set

later

 and press 

OK

 to confirm.

Settings for compartment 

The UltraPhase 1 values are preset in
the standard settings.

Agent for 

OK

Confirm with the 

OK

 sensor control.

Miele UltraPhase 1

OK

Confirm with the 

OK

 sensor control.

The following appears in the display:

 

Set the dosage. Observe water hardness

levels

Confirm with the 

OK

 sensor control.

The dispensing quantity for
UltraPhase 1 is preset for 

 

(hardness

level II)

.

Per load

OK

ml

58

Confirm the preset value with the
OK sensor control. If you want to
change this value, use the



 sensor controls and confirm with

the 

OK

 sensor control.

UltraPhase 1

Hardness level I

46 ml

Hardness level II

58 ml

Hardness level III

70 ml

Содержание WWI 860 WPS

















































































































Отзывы:

Нет отзывов