Miele WWD 320, Руководство по эксплуатации

Страница: 47 / 84

Cleaning and care
47
Hygiene info
(Cleaning the drum)
Washing at low temperatures and/or
using liquid detergent can cause
bacteria and unpleasant odours to build
up in the washing machine. Use the
Cottons 90 °C programme to clean the
washing machine. This should be done
at the latest when the indicator light

comes on.
Cleaning the water inlet filter
The washing machine has 2 filters to
protect the inlet valve. Check these
filters every 6 months or so. Perform
this check more often if there are
frequent interruptions to the external
water supply.
Cleaning the filter in the inlet hose

First turn off the tap.
 Unscrew the inlet hose.

Remove the rubber seal 1 from the
recess.
 Using pointed pliers, take hold of the
plastic filter bar
2 and remove the
plastic filter.

Clean the filter.
 Reassemble the filter and seal in the
reverse order and reconnect the
hose.
Cleaning the filter in the inlet valve
 Using pliers, carefully loosen the
ribbed plastic nut on the inlet valve
and unscrew it.

Use pointed pliers to withdraw the
plastic filter by the bar.

Clean the filter.

Reassemble the filter and seal in the
reverse order and reconnect the
hose.
The filters must be put back in place
after cleaning.
 Turn on the tap.
Make sure there is no water leaking
from the connections.