Programmable functions
73
Lock code
The lock code prevents the washing
machine being used without your
knowledge.
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Options
= Lock code switched off
(factory default setting)
= Lock code is switched on
Using the washing machine with a
lock code
The code is
125
and cannot be altered.
Switch on the washing machine.
appears in the time display and
the
and
sensors light up.
Touch the
sensor.
appears in the time display.
Confirm the number with the
Start
/
Add laundry
sensor.
The first number was saved and you
can now enter the second number
using the
and
sensors.
Also enter the second and third
numbers and confirm the numbers
with the
Start
/
Add laundry
sensor.
The lock is released and a wash
programme can now be selected and
started.
Control panel switch-off
status
To save energy the time display and
sensors will go out after 10 minutes,
and only the
Start
/
Add laundry
sensor
will flash slowly.
Options
= Off
The time display and sensors
will remain lit up while the
washing machine is switched
on
= On
(factory default setting)
The time display and sensors
will switch off after 10 minutes
if the programme is started.
However; the time display and
sensors will remain lit up for
10 minutes after a delay start
time has elapsed, after the end
of the programme or at the end
of the anti-crease phase.
Содержание WWD 120
Страница 80: ......
Страница 81: ......
Страница 82: ......
Страница 84: ...M Nr 11 661 570 01 en SG WWD 120 ...