Miele WWD 120 Скачать руководство пользователя страница 27

Страница: 27 / 84

6. End of programme

Opening the door and
removing the laundry

The door remains locked during the
anti-crease phase. The control field
lights up for the first 10 minutes. The
control field then goes out and
the

Start

Add laundry

sensor control

flashes.



Turn the programme selector to the



position.



appears on the timer display and

the



indicator light goes out.

The door unlocks.

Tip:

After the anti-crease phase, the

door will have unlocked automatically.



Take hold of the door and pull it
open.



Remove the laundry.

Items left in the drum could discolour
other items in the next wash or
become discoloured themselves.
Remove all items from the drum.



Check the door seal for any foreign
objects.

Tip:

Leave the door slightly open to

allow the drum to dry.



If applicable, remove the used
capsule from the detergent drawer.

Tip:

Leave the detergent drawer slightly

open to allow it to dry.

Содержание WWD 120





















































































Результаты поиска

Содержание WWD 120

Отзывы:

Похожие инструкции для WWD 120

Бренды по названию

Популярные бренды

Miele WWD 120, Руководство по эксплуатации

Результаты поиска

Содержание WWD 120

Отзывы:

Похожие инструкции для WWD 120

Бренды по названию

Популярные бренды