Miele WWB 020, Руководство по эксплуатации

Страница: 14 / 80

Before using for the first time
14

Damage from incorrect
installation and connection.
Installing and connecting the
washing machine incorrectly will
cause serious damage to property.
See “Installation and connection”.
Removing the protective foil
and stickers
 Remove:
– The protective foil from the door
– Any stickers (if present) from the front
and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Remove the drain hose elbow
from the drum
An elbow piece for the drain hose is
stored in the drum.
 Pull open the door.
 Remove the elbow piece.

Shut the door with a gentle swing.
This washing machine has undergone
a complete functional test at the
factory and some residual water will
therefore remain in the drum from this
process.
For safety reasons, spinning is not
possible until the machine has been
prepared for use for the first time. To
activate the spinning function, you must
run a wash program without laundry
and without detergent.
Using detergent could result in an
excessive build-up of foam!
The ball valve is activated at the same
time. The ball valve prevents detergent
escaping from the suds container into
the sump during a wash program, thus
making maximum use of the detergent.