Cleaning and care
84
Cleaning the water inlet filter
The washer-dryer has a filter to protect
the water inlet valve. The filter at the
open end of the water inlet hose should
be checked approximately every
6 months. Perform this check more
often if there are frequent interruptions
to the external water supply.
First turn off the tap.
Unscrew the water inlet hose from the
tap.
Remove the rubber seal
1
from the
recess.
Hold the free end of the water inlet
hose upside down. The plastic filter
2
will fall out.
Clean the plastic filter.
Reassemble in reverse order.
Turn on the tap and check that the
connection is watertight. If water
drips out, tighten the connection.
Never
forget to put the filter back in
place after cleaning.
Содержание WTW 870 WPM
Страница 126: ......
Страница 128: ...M Nr 11 976 031 01 en AU NZ WTW 870 WPM ...