Changing the programme sequence
75
Changing the programme
(safety lock)
It is not possible to change the
programme, the temperature, the spin
speed or the selected Extras after the
programme has started. This prevents
the appliance being operated
unintentionally, e.g. by children.
If the washer-dryer is switched off
during active programme operation,
the standby function does not switch
the washer-dryer off completely after
15 minutes. Safety functions continue
to be active because there may still be
water inside the drum.
Cancelling a programme
You can cancel a programme at any
time after it has started.
Touch the
Start/Stop
sensor.
The following will appear in the display:
Cancel the programme?
Select
Yes
.
- During washing
The suds will be pumped away and the
programme is cancelled.
- During drying
The laundry will be cooled down before
the door can be opened.
Removing the laundry
Wait until the
symbol in the display
goes out and the door is unlocked.
Pull the door open and unload the
drum.
Selecting another programme
Close the door.
Select the required programme.
Add detergent to the detergent
dispenser drawer, if necessary.
Touch the
Start/Stop
sensor.
The programme will start.
Interrupting a programme
Switch the washer-dryer off with the
sensor.
To continue the programme, switch
the washer-dryer back on with the
sensor.
Danger of overheating due to hot
laundry.
Hot laundry can ignite.
Never switch the washer-dryer off
during a drying programme.
If you absolutely must interrupt the
programme, remove all items
immediately and spread them out to
cool down.
Содержание WTW 870 WPM
Страница 126: ......
Страница 128: ...M Nr 11 976 031 01 en AU NZ WTW 870 WPM ...