Miele WTW 870 WPM, Руководство по эксплуатации

Страница: 25 / 128

Before the first use
25
3. Setting the clock format
The time of day display can be in 12 h
or 24 h clock format.
 Select the clock format you want and
confirm this with the
OK sensor.
The display will then bring up the
screen for setting the time of day.
Setting the time of day
This message only appears if the
washer-dryer has not yet been
connected to a Wi-Fi network. The
time of day is set automatically if
connection is established with a Wi-Fi
network.
12 00
11 59
10 58
13 01
14 02
Time
OK

Place your finger on the number that
you want to change and move your
finger in the desired direction.

Confirm with the OK sensor.
4. Removing the transit bars

Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washer-dryer
and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in “Installation”.
The following message appears in the
display:

Remove transit bars and observe
"Warning and Safety instructions" and
"Before using for the first time" in the
operating instructions
 Confirm that the transit bars have
been removed with the
OK sensor.
The display will change to the next
setting.