Changing the programme sequence
73
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected options cannot be changed
once the machine has been success-
fully started. This prevents the machine
being operated unintentionally, e.g. by
children.
If the washer-dryer is switched off dur-
ing active programme operation, the
standby function does not switch the
washer-dryer off completely after
15 minutes. Safety functions continue
to be active because there may still be
water inside the drum.
Cancelling a programme
You can cancel a programme at any
time after it has started.
Touch the
Start/Stop
sensor control.
The following will appear in the display:
Cancel the programme?
Select
Yes
.
- During washing:
The washer-dryer pumps the suds away
and the programme is cancelled.
- During drying:
The washer-dryer cools the laundry
down before the door can be opened.
Removing the laundry
Wait until the
symbol in the display
goes out and the door is unlocked.
Pull the door open and unload the
laundry.
Selecting another programme
Close the door.
Select the programme you want to
use.
Add detergent to the detergent
drawer, if necessary.
Press the
Start/Stop
button.
The programme will start.
Interrupting a programme
Switch the washer-dryer off with the
button.
To continue the programme, switch
the washer-dryer back on with the
button.
Danger of overheating due to hot
laundry
Hot laundry can ignite.
Never switch the washer-dryer off
during a drying programme.
If you absolutely must interrupt the
programme, remove all items imme-
diately and spread them out to cool
down.
Содержание WTR 860 WPM
Страница 128: ...M Nr 11 584 430 02 en GB WTR 860 WPM ...