Before using for the first time
28
6. Starting the calibration pro-
gramme
It is important to calibrate the washer-
dryer to ensure optimum water and
energy usage, as well as optimum
washing and drying results.
To do this, the
Cottons
programme
must
be run without laundry.
No other programmes can be started
until calibration has been carried out.
The following message will then appear
in the display:
Open the stopcock and start the Cottons
90°C programme with an empty drum
Confirm with the
OK
sensor control.
The display will then change to the
standard menu for the
Cottons
pro-
gramme.
11:02
90 °C
1600
1:57
Cottons
h
Washing
Temperature
Spin speed
TwinDos
Extras
not selected
Whites
Timer
Save
rpm
Open the stopcock.
Touch the
Start/Stop
sensor control.
The washer-dryer calibration pro-
gramme will start. The duration will be
approximately 2 hours.
At the end of the programme, the fol-
lowing message will appear in the dis-
play:
Set up complete
Reach under the recessed grip and
pull the door open.
Tip:
Leave the door slightly open to al-
low the drum to dry.
Switch the washer-dryer off with the
button.
Содержание WTR 860 WPM
Страница 128: ...M Nr 11 584 430 02 en GB WTR 860 WPM ...