Before using for the first time
25
5. Setting up TwinDos
Skip
Continue
Set up "TwinDos"?
Touch the
Continue
sensor control to
set TwinDos up straight away.
Tip:
To postpone setup until later: touch
the
Skip
sensor control. The following
message will then appear in the display:
It is possible to set up later in "Settings" /
"TwinDos".
Confirm with the
OK
sensor control.
Setting up compartment
The procedure for Miele UltraPhase 1
and Miele UltraPhase 2 is described be-
low. The procedure for other detergents
is similar.
No agent
Agent for comp.
Miele
UltraPhase 1
Universal
detergent
Colour
detergent
Delicates
detergent
Delicates/
Woollens
OK
11:02
Touch the
Miele UltraPhase 1
sensor
control.
The following message will then appear
in the display:
Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase 1 is preset for
(water
hardness level II)
.
58
57
56
59
60
Dosage for comp.
ml
OK
11:02
Confirm the preset value with the
OK
sensor control, or change the
value.
UltraPhase 1
Water hardness level I
46 ml
Water hardness level II
58 ml
Water hardness level III 70 ml
The following will appear in the display:
Insert container
Содержание WTR 860 WPM
Страница 128: ...M Nr 11 584 430 02 en GB WTR 860 WPM ...