Miele WDD 131 WPS GuideLine Скачать руководство пользователя страница 80

Страница: 80 / 88

Programmable functions



Lock code

The lock code prevents the washing
machine being used without your
knowledge.

When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.

Options



= Lock code switched off

(fact-

ory default setting)



= Lock code is switched on

Using the washing machine with a
lock code

The code is

125

and cannot be altered.



Switch on the washing machine.

  

appears in the time display and

the



and



sensors light up.



Touch the



sensor.

 



appears in the time display.



Confirm the number with the

Start/

Stop

sensor.

The first number was saved and you
can now enter the second number us-
ing the



and



sensors.



Also enter the second and third num-
bers and confirm the numbers with
the

Start/Stop

sensor.

The lock is released and a wash pro-
gramme can now be selected and star-
ted.



Control panel switch-off

status

To save energy the time display and
sensors will go out after 10 minutes,
and only the

Start/Stop

sensor will

flash slowly.

Options



= Off

The time display and sensors
will remain lit up while the
washing machine is switched
on



= On

(factory default setting)

The time display and sensors
will switch off after 10 minutes
if the programme is started.

However; the time display and
sensors will remain lit up for
10 minutes after a delay start
time has elapsed, after the end
of the programme or at the end
of the anti-crease phase.

Содержание WDD 131 WPS GuideLine

























































































Результаты поиска

Содержание WDD 131 WPS GuideLine

Отзывы:

Похожие инструкции для WDD 131 WPS GuideLine

Бренды по названию

Популярные бренды

Miele WDD 131 WPS GuideLine, Руководство по эксплуатации

Результаты поиска

Содержание WDD 131 WPS GuideLine

Отзывы:

Похожие инструкции для WDD 131 WPS GuideLine

Бренды по названию

Популярные бренды