Spinning
41
Omitting the final spin (Rinse
hold)
If Rinse hold is selected, the laundry
remains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be
removed from the drum immediately
after the end of the programme.
Select the
Rinse hold
Extra.
Starting the final spin
You can reduce the spin speed.
Touch the
Change spin speed
sensor.
Select the desired spin speed.
Start the final spin with the
Start/Stop
control.
Ending the wash programme
Select this option if you want to remove
the laundry when it is dripping wet and
without having been spun.
Touch the
Change spin speed
sensor.
Select Spin speed
0 rpm
(no spin).
Touch the
Start/Stop
sensor.
The water will be pumped away.
Rinse and interim spin
There is a spin cycle after the main
wash and between the rinses. A
reduction in the final spin speed will
also reduce the interim spin speed.
Omitting interim spin and the
final spin
Touch the
Spin speed
sensor.
Select the
0
rpm
setting.
After the last rinse, the water will be
pumped away and the Anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
Содержание WCR 870 WPS
Страница 112: ......
Страница 113: ......
Страница 114: ......
Страница 116: ...M Nr 11 016 590 00 en AU NZ WCR 870 WPS ...