manualshive.com logo in svg

Miele WCA 020 Active, Руководство по эксплуатации

Поделиться
Скачать
Miele WCA 020 Active Скачать руководство пользователя страница 30

Programme chart

30

ECO 40-60

Max. load 7,0 kg

Items

For normally soiled cotton garments

Tip

A laundry load consisting of mixed cottons that are intended for
washing at 40 °C or 60 °C can be washed in the same wash cycle.

This programme is the most efficient in terms of energy and water
consumption for washing cottons.

Note for test institutes:

Test programme for compliance with EU legislation regarding ecodesign
No. 2019/2023 and energy labelling in accordance with Regulation
No. 2019/2014.

Note for test institutes:

For test programmes that conform to EN 60456 and the energy label to Direct-
ive 1061/2010, change the following settings:

Temperatures 60 and 40 light up in the temperature display.

- Touch the 

 sensor control 

once

 for the 

 Cottons test programme. Only

60 lights up on the display.

- Touch the 

 sensor control 

2 times

 for the 

 Cottons test programme.

Only 40 lights up on the display.

Cottons

Cold to 90 °C

Max. load 7,0 kg

Items

Cotton, linen or mixed fibre fabric, e.g. table linen, towelling, under-
wear, T-shirts, etc.

Tip

Where particularly high levels of hygiene are required, please select
a temperature of 60 °C or higher.

If you want to select a pre-wash programme, turn the programme
selector to 

with pre-wash

.

Содержание WCA 020 Active





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды