Settings
95
Disp. switch-off stat.
To save energy, the display and
sensor controls will go out after
10 minutes. The
Start/Add laundry
button flashes slowly. You can change
this setting.
Selection
-
On
(default setting)
The display will go out (after
10 minutes):
– if a programme is not selected
after the dryer has been switched
on
– during the current programme
– after the end of a programme.
-
On (not current pr.)
The display will go out (as described
above) but will remain on while the
programme is running.
-
Off
The display will remain on (i.e. it will
never go out).
You can switch the display back on by
touching any sensor control.
Memory
The dryer saves the settings that were
selected last for a drying programme
(drying stage and/or extra option, or
the duration for some programmes).
When the programme is chosen again,
the saved settings will appear in the
display.
Selection
-
Off
(factory default setting)
-
On
The activation of delay start, the buzzer,
or ECO feedback data are not saved.
Anti-crease
The Anti-crease function reduces
creasing after the end of the pro-
gramme.
The drum will continue to rotate for up
to 2 hours after the drying cycle has fin-
ished. This helps to reduce creasing.
Options
-
Off
-
1 h
-
2 h
(factory default)
Содержание TEL 785 WP
Страница 100: ...M Nr 11 892 090 01 en GB TEL 785 WP ...