Problem solving guide
63
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Some of the messages in the display are more than one line long. Touch the
or
sensor to read them in full.
Fault messages shown in the display when a programme is
cancelled
Message
Cause and remedy
Clean the plinth filter.
See
The system has been clogged by fluff or detergent
residue.
To clear the message, turn the programme se-
lector to the
position.
Clean the fluff filters and the plinth filter.
Please see “Cleaning and care” for notes on clean-
ing.
The fluff and/or plinth filters are damaged or out of
shape.
Check the fluff filters and the plinth filter. Replace
them if necessary.
The fluff and/or plinth filters are clogged. It is no
longer possible to clean them.
Check the fluff filters and the plinth filter. Replace
them if necessary.
“Problem solving guide – Replacing the plinth filter”
contains information about when a plinth filter that
is no longer in good working order has to be re-
placed.
Содержание TEL 785 WP
Страница 100: ...M Nr 11 892 090 01 en GB TEL 785 WP ...