Programmable functions
50
Anti-crease
Helps prevent creasing, if laundry is
not normally removed immediately
after the end of a programme. The
drum rotates at intervals for 2 hours
after the end of a programme.
The anti-crease function
– is activated ex-works. You can
shorten the duration of the anti-
crease phase or deactivate it if
wished.
– is active in all programmes, except
Woollens handcare.
– should always be switched on.
Follow steps (
,
,
...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to
Finish
.
Press
Start
and keep it pressed in
whilst carrying out steps
-
.
Switch the dryer on.
Wait until the indicator light for the
Start
button lights up constantly . . .
. . . and then release the
Start
button.
Turn the programme selector to
Cottons Normal
.
The
Empty container
indicator light will
flash three times.
The option selected will be displayed
by a
number
which will alternate with
.
Anti-crease action off
Anti-crease 1 h
)
(The
Clean out airways
will also flash
once)
Anti-crease 2 h
(factory default
setting
(The
Clean out airways
will also flash
twice)
Pressing the
Start
button switches
between the options.
Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps
-
.
Switch the dryer off after checking.
Содержание TDA 140 C
Страница 58: ......
Страница 60: ...M Nr 09 938 570 00 en GB TDA 150 C ...