Delay start
30
To select delay start
Touch the
sensor.
lights up brightly
Touch the
or
sensor repeatedly
until the required delayed start time
appears in the time display.
– Selection is from
(minutes) to
(hours) in half-hour stages and then
in one hour increments up to
.
– By touching the
or
sensors
repeatedly, the time goes upwards or
downwards.
– If you touch the
sensor again, the
selected time is deleted.
To begin delay start
Touch the
Start/Stop
sensor.
–
Start/Stop
and
light up
– The
sensors go out
– Delay start times of more than
will
count down in hours and then in
minutes until the start of the
programme.
– The drum will turn briefly every hour
until the start of the programme to
reduce creasing.
Changing delay start
Touch the
Start/Stop
sensor.
You can change the time with the
sensors.
Touch the
Start/Stop
sensor so that
the delay start period continues.
Adding or removing laundry
You can open the door to add/
remove laundry.
– All programme settings will be saved.
– You can also change the drying level,
if required.
Close the door.
Touch the
Start/Stop
sensor so that
the delay start period continues.
Cancelling delay start
To cancel, turn the programme
selector to
.
Содержание TCE 620 WP
Страница 72: ......
Страница 73: ......
Страница 74: ......
Страница 76: ...M Nr 10 621 360 00 en GB TCE 620 WP ...