Technical Information
Date: June 7, 2004
To: Technical Service
Subject: Washer/Dryer Stand W1113, 1119, 1203, 1213, 1215
T1302, 1303, 1322C, 1323C, 1329C, 1403, 1405
Страница 1: ...Technical Information Date June 7 2004 To Technical Service Subject Washer Dryer Stand W1113 1119 1203 1213 1215 T1302 1303 1322C 1323C 1329C 1403 1405 ...
Страница 2: ... to installing the stands Drawer Removal Pull the drawer out all the way Lift upward to release and remove see Fig 2 Rear Panel Removal Remove the rear panel screws Torx T20 and remove the rear panel see Fig 3 Leveling The stands must be leveled prior to installing the washer and dryer Place the stands into their locations see Fig4 Adjust the feet until the stands are level Tighten the counter nut...
Страница 3: ...feet Using the threaded studs and nuts provided M8 screw 2 nuts midway onto each threaded stud Screw the threaded studs M 8 into the dryer and tighten them see Fig 7 Install a washer 8 5 x 30 x 2 on each threaded stud Fit the stand onto the studs Install a washer 8 4 on each threaded stud Screw a nut M 8 on each threaded stud and tighten Stand the dryer upright Install the dryer stand rear panel u...
