Maintenance
39
Then run the vacuum cleaner to va-
cuum up the cut threads and hairs.
If the small running wheels are very
heavily soiled or blocked, you can re-
move them for easier cleaning (not ne-
cessary in the case of the handheld
brush). To remove them, use a flat-
head screwdriver.
Removing the roller brush from
the Electrobrush
(Not possible with the handheld brush)
You can take the roller brush out of the
Electrobrush in order to remove stub-
born soiling and clean the inside of the
Electrobrush.
Unlock the cover on the side of the
Electrobrush so that the
symbol
becomes visible
a
.
Lift the cover up as far as it will go
b
.
Remove the roller brush
c
.
Remove the roller brush handle if you
identify heavy soiling there
d
.
Clean the roller brush and the roller
brush handle, and remove any stub-
born soiling inside the Electrobrush.
Reassemble the Electrobrush in re-
verse order.
Replacing the rechargeable
battery
An original Miele AP01/AP02/AP03 lith-
ium-ion rechargeable battery (HX LA) is
required.
Follow the instructions regarding the
handling and disposal of rechargeable
batteries found in the following sec-
tions: “Warning and safety”, “Caring
for the environment” and “Installation
and connection - General battery in-
formation”).
