manualshive.com logo in svg

Miele SmartLine Tepan Yaki, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine Tepan Yaki Скачать руководство пользователя страница 27

Timer

27

Auto switch off

You can set a time after which a heater
element/Tepan Yaki zone will switch off
automatically. This function can be
used for all cooking zones at the same
time.

If the time programmed is longer than
the maximum operating time allowed,
the heater element/Tepan Yaki zone
will be switched off by the safety
switch-off function (see “Safety
features – Safety switch-off”).

The switch-off time is set on the
numerical display for each cooking
zone you want to switch off
automatically.

Setting the switch-off time

Select a power level for the desired
heater element/Tepan Yaki zone.

Touch the 

 sensor control.

The timer display flashes.

Set the required duration.

Touch the 

 sensor control or wait

10 seconds to start the switch-off time.

The heater element allocation auto
switch off indicator light pulsates.

If you want to set a switch-off time for
another heater element/Tepan Yaki
zone, follow the same steps as
described above.

If more than one switch-off time is
programmed, the shortest time left will
be displayed, and the corresponding
indicator light will pulsate. The other
indicator lights will light up constantly.

If you want to show the times left
counting down in the background,
touch the 

 sensor control of the

desired heater element/Tepan Yaki
zone.

Changing the switch-off time

Touch the 

 sensor control

repeatedly until the indicator light for
the required heater element/Tepan
Yaki zone pulsates.

The timer display flashes.

Set the required duration.

Deleting the switch-off time

Touch the 

 sensor control

repeatedly until the indicator light for
the required heater element/Tepan
Yaki zone pulsates.

The timer display flashes.

Touch the 

 sensor control on the

numerical display.

Содержание SmartLine Tepan Yaki









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды