manualshive.com logo in svg

Miele SmartLine CS 7101, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele SmartLine CS 7101 Скачать руководство пользователя страница 25

Operation

25

Switching on

If you are operating a gas cooking
appliance next to a downdraft
extractor, this will affect the gas
cooking appliance's function.
Place the FlameGuard between the
gas cooking appliance and the
downdraft extractor.

Risk of fire due to overheated

food!
Unattended food can overheat and
ignite.
Do not leave the wok unattended
whilst it is being used.

Press in the relevant control knob and
turn it anti-clockwise to the large
flame symbol. The ignition electrode
will “click” and ignite the gas.

When a control knob is activated, a
spark is automatically generated on all
burners. This is normal and does not
indicate a fault.

When a flame is visible, keep the
control knob pressed in for 5–
10 seconds, and then let it go.

If the burner has not ignited or goes
out, turn the control knob to the

 position. Aerate the room or wait for

at least one minute before trying
again. Try keeping the control knob
pressed in for a little longer the next
time.

If the burner does not ignite the
second time, turn the control back to
the 

 position and see “Problem

solving guide”.

Switching on during a power outage

If there is an interruption to the
electricity supply, the gas can be
ignited manually, e.g. with a match.

Press down the relevant control knob
and turn it anti-clockwise to the large
flame symbol.

Hold the control knob pressed down
and light the gas at the burner with a
match.

Keep the control knob pressed down
for a further 5-10 seconds and then
release it.

Содержание SmartLine CS 7101









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды