Converting to another gas type
*INSTALLATION*
66
Changing the main jets
Remove the burner caps
and
burner head
.
Using an M7 socket spanner, un-
screw the main jets
.
Fit the correct jets securely (see jet
table).
Secure the jets against inadvertent
loosening with sealing wax.
Changing the small jets
Remove the burner components.
Unscrew the fixing screws from the
burner.
Pull the rotary control off.
Loosen the fixing nuts/screws (de-
pending on the model) on the under-
side.
Carefully remove the base.
a
c
b
a
Ignition switch
b
Small jet with smaller diameter
c
Small jet with larger diameter
Remove the ignition switch
.
Using a small screwdriver, unscrew
the two small jets
in the gas fit-
ting.
Pull out the jets with a pair of pointed
pliers.
Содержание SmartLine CS 7101-1
