Miele PWM 906, Инструкции по эксплуатации и монтажу

Страница: 90 / 100

Supervisor level
90
Select COM module
This washing machine is equipped
with an integrated WiFi module.
However, the washing machine can
also be equipped with an external
module.
– Off
– Internal module (factory default)
The internal WiFi module is used.
– External module
An XKM module or RS232 module is
inserted into the module slot.
WiFi
Control the networking of your
washing machine.
– Setup
This message only appears if the
washing machine has not yet been
connected to a WiFi network.
– Deactivate (visible when the network
is activated)
The network remains set up; the WiFi
function is switched off.
– Activate (visible if the network is
deactivated)
The WiFi function is reactivated.
– Connection status (visible when the
network is activated)
– The quality of WiFi reception
– The network name
– The IP address
– Set up again (visible if already set up)
Resets the WiFi login (network) to
immediately re-establish a new
connection.
– Reset (visible if already set up)
The network is no longer set up. A
new connection has to be
established in order to use the
network again.
– The WiFi is switched off
– The WiFi connection will be reset
to the factory default
Network sign-on
The date and time can be
synchronized over the network.
– Off
The date and time are not
synchronized over the network.
– As master
The machines are in a network but
are not connected to the Internet. A
machine is declared as the master
and sends data to the
slave
appliances.
– As slave
The machines are in a network and
are connected to the Internet. All
machines are configured as
slaves .
Data is synchronized over the
Internet.