Miele PWM 906 Скачать руководство пользователя страница 27

Страница: 27 / 100

5. Adding detergent

Adding fabric softener or liquid
starch separately



Select the

Separate rinse

program.



Change the spin speed if necessary.



Add the fabric softener or the liquid
starch to the



compartment.

Do not

exceed the maximum level mark.



Touch the

Start/Stop

sensor control.

This will be automatically dispensed in
the final rinse. At the end of the
program, a small amount of water
remains in the



compartment.

Adding starch separately



Prepare the starch solution in
accordance with the manufacturer’s
instructions on the packaging.



Select the

Starch

program.



Add the prepared starch to the



compartment.



Touch the

Start/Stop

sensor control.

Useful tip:

If starching separately or

automatically, thoroughly clean the
detergent dispenser drawer, especially
the siphon, regularly.

Dye removers and dyes



Damage due to colour run/dye

removers.
Colour run and dye removers can
cause corrosion in the washing
machine.
Do not use colour run or dye
removers in this washing machine.

Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.

Содержание PWM 906





































































































Результаты поиска

Содержание PWM 906

Отзывы:

Похожие инструкции для PWM 906

Бренды по названию

Популярные бренды

Miele PWM 906, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание PWM 906

Отзывы:

Похожие инструкции для PWM 906

Бренды по названию

Популярные бренды