Miele PLW 8615 Скачать руководство пользователя страница 62

Страница: 62 / 100

System settings

Carrying out self-
disinfection
(optional)

This button is only displayed when the machine is fitted with an inter-
nal tank. The machine’s internal tanks are disinfected during the auto-
matic system test by the

Self-disinfection

function.

If the automatic self-disinfection of the internal tank was not com-
pleted without faults, this function can be started manually.

Self-disinfection can only be carried out if there are no load carriers
in the wash cabinet.



Press the

Self-disinfection

button.

The steps required for self-disinfection run automatically. Once self-
disinfection has finished, a message will appear on the display:

Self-disinfection completed

Self-disinfection failed



Press

to confirm the message.

If self-disinfection is not repeated successfully, contact Miele Tech-
nical Service.

You can cancel self-disinfection with the



button in the footer.

The

Cancel self-disinfection?

confirmation prompt is displayed. Press

Yes

to cancel self-disinfection and press

to continue with self-

disinfection.

Содержание PLW 8615





































































































Результаты поиска

Содержание PLW 8615

Отзывы:

Похожие инструкции для PLW 8615

Бренды по названию

Популярные бренды

Miele PLW 8615, Руководство по эксплуатации

Результаты поиска

Содержание PLW 8615

Отзывы:

Похожие инструкции для PLW 8615

Бренды по названию

Популярные бренды