Operation
44
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes af-
ter the last time a button has been
pressed or after the end of a program.
Press the
button to switch the
dishwasher back on.
The dishwasher will not switch off
while a program or the FlexiTimer is
running or if there is a fault.
Program end
At the end of a program, the in-opera-
tion indicator light will be flashing slowly
with the door shut. The buzzer might
also be sounding.
The program has finished when
End
appears in the display and the door has
opened slightly (if applicable).
The drying fan may continue to run for
a few minutes at the end of the pro-
gram.
Open the door completely to re-en-
gage the door closing mechanism.
The dishwasher can now be emptied.
The in-operation indicator light will go
out 10 minutes after the end of the pro-
gram if the door is closed.
If you have deactivated the auto-
matic door-opening function (see
“Settings menu – AutoOpen”), but
would still like to open the door at
the end of the program, make sure
that you open the door fully.
Otherwise, steam from the dish-
washer could damage the edge of
the counter because the fan is no
longer running.