Miele PG 8131i Скачать руководство пользователя страница 55

Страница: 55 / 92

Cleaning and care

Periodic checks

To prolong the service life of the dish-
washer, it should should be serviced

least once a year

by Miele Service.

This maintenance will cover the follow-
ing:

– Electrical safety according to national

regulations (VDE 0701/0702 in Ger-
many)

– Door mechanism and door seal

– Any screw connections and connect-

ors in the wash cabinet

– Water inlet and drainage

– Internal and external dispensing sys-

tems

– Spray arms

– Filter combination

– Sump including drain pump and non-

return valve

– All baskets and inserts

The following operational tests will be
carried out as part of the maintenance:

– A programme will be run as a test run

– Seals will be tested for water tight-

ness

– All relevant measuring systems will

be safety tested, including fault dis-
plays

– Safety features

Check the condition of your dish-
washer regularly (approx. every 4 - 6
months). This way faults and prob-
lems can be avoided.



All surfaces are susceptible to

scratching.
Contact with unsuitable cleaning
agents can alter or discolour the ex-
ternal surfaces.

Cleaning the wash cabinet

The wash cabinet is largely self-clean-
ing, provided that the correct amount of
detergent is always used.

If, despite this, limescale or grease de-
posits accumulate in the cabinet, these
can be removed with a proprietary dish-
washer cleaner (available from Miele).
Follow the dosage recommended by
the manufacturer on the packaging.



Clean the filters in the wash cabinet
regularly.

Содержание PG 8131i





























































































Результаты поиска

Содержание PG 8131i

Отзывы:

Похожие инструкции для PG 8131i

Бренды по названию

Популярные бренды

Miele PG 8131i, Руководство по эксплуатации

Результаты поиска

Содержание PG 8131i

Отзывы:

Похожие инструкции для PG 8131i

Бренды по названию

Популярные бренды