Miele PG 8130 U Скачать руководство пользователя

Страница: 19 / 92

Commissioning

Opening the door

At the end of programs with a drying
phase (see “Program overview”), the
door will slightly open automatically in
order to help the drying process.
This function can be deactivated, if
preferred (see “Settings, AutoOpen”).



To open the door, reach under the
door grip and pull.



Open the door completely to re-
engage the door closing mechanism.

If the door is opened during operation,
all functions are automatically
interrupted.



Water in the dishwasher may be

hot. Danger of scalding!
Only open the door during operation
if absolutely necessary and exercise
extreme caution when doing so.



Keep the area around the door

free of obstructions.

Closing the door



Push the baskets in.



Push the door until it clicks shut.



Risk of crushing!

Do not put your hand inside the door
as it is closing.

Child lock

Use the child lock to prevent children
opening the dishwasher door.



To lock the door, push the slide
underneath the door grip to the right.



To unlock the door, push the slide to
the left.

Содержание PG 8130 U





























































































Результаты поиска

Содержание PG 8130 U

Отзывы:

Похожие инструкции для PG 8130 U

Бренды по названию

Популярные бренды

Miele PG 8130 U, Руководство по эксплуатации

Результаты поиска

Содержание PG 8130 U

Отзывы:

Похожие инструкции для PG 8130 U

Бренды по названию

Популярные бренды