Settings menu
85
Check filters
You can adjust the interval at which the
message to remind you to check the
filters appears.
You can set an interval between 30 and
60 programme cycles.
The reminder to check the filters is set
at the factory to appear after every 50
programme cycles.
Select the interval you want and
confirm this with
OK
.
AutoOpen
At the end of programmes with a drying
phase (see “Programme chart”), the
door will open automatically a little in
order to help the drying process.
With the
ECO
programme (if available)
the door opens during the drying
phase.
This function can be deactivated if you
wish.
Select the setting you want and
confirm with
OK
.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
BrilliantLight (depending on
model)
The dishwasher is fitted with interior
lighting.
When the door is open, the lighting
switches off automatically after 15
minutes.
You can also switch off the interior
lighting permanently.
Select the setting you want and
confirm with
OK
.
Software version
You can call up the electronic software
version of your dishwasher for technical
support purposes.
Confirm the display with
OK
.