Settings menu
78
Rinse aid
You can adjust the rinse aid dosage for
best results.
The dispenser can be set between 0
and 6 ml.
3 ml is set as standard.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the
programme.
If spots appear on crockery and
glassware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.
Select the setting you want and
confirm your choice with
OK
.
External dispensing
Activate automatic dispensing of liquid
detergent if you have installed the
optional external dosing module.
The DOS module is supplied with its
own installation instructions.
Select the setting you want and
confirm with
OK
.
The setting will remain active until
you deactivate “External dispensing”.
When using liquid dispensing via a DOS
module, you can dispense the
detergent according to the detergent
manufacturer's instructions as a
percentage or in millilitres per minute
Detergent quantity
The following functions will only
become visible when external
dispensing has been activated.
A detergent amount of 0.50 % is set as
standard. The dispensed quantity can
be modified between 0.1 and 2.00 % in
increments of 0.05 %.