background image

Settings menu

76

Time of day

The dishwasher is delivered with the
time of day (clock) display deactivated.

To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button is pressed or
after the end of a programme.

Setting the time of day (clock) display

When the time of day (clock) display
has been activated, the current time of
day will appear in the display a few
minutes after the last time a button is
pressed or after the end of a
programme. This will increase energy
consumption.

Select the 

Display

 option and confirm

with 

OK

.

Select the setting you want and
confirm with 

OK

.

If you have selected 

On

, confirm the

message about higher energy
consumption with 

OK

.

Setting the clock format

You can select either a 24 hour or 12
hour clock.

Select the 

Clock format

 option.

Select the setting you want and
confirm with 

OK

.

Setting the time of day

You can set the time of day.
The current time of day must be set
before you can use the “FlexiTimer”
programme option.

Select the 

Set

 option.

Use the 



 arrow buttons to set the

hours and confirm with 

OK

.

Then set the minutes and confirm
with 

OK

.

The time of day has now been saved.

Synchronise

This option is only displayed if you
have activated the network settings
(see “Settings menu - Network”).

You can adopt the current time of day
from a Miele@home SuperVision
appliance.

Select the 

Synchronise

 option.

Select the setting you want and
confirm with 

OK

.

The time from the SuperVision
appliance will be displayed

Содержание PG 8110 SmartBiz

























































































Отзывы: