Additional settings
81
Additional functions
With these functions, it is possible to adjust individual parameters to
adapt program cycles to particular types of soiling and optimize
cleaning results.
Select the
Additional settings
menu.
Select
Additional functions
and open the corresponding menu by
pressing the
OK
button.
In the menu that then appears, you can choose from the following
options:
–
Reset
Reset all of the parameters changed under the "Additional func-
tions" menu to their default settings.
–
Increased water level
Increase the amount of water used in all wash programs.
–
Interim rinse
Include an interim rinse in all programs that support this feature
(see "Program chart").
–
Dispensing system
Vent the dispensing systems and change the name of the DOS
modules.
–
Temperature / Time
Change the temperature and holding time for the main wash and fi-
nal rinse stages of a wash program.
Resetting
Select the
Reset
option and confirm your choice with the
OK
but-
ton.
Reset
Yes
No
(
Select
Yes
and confirm your selection with the
OK
button.
All parameters that have been changed under "Additional func-
tions" will be reset to the factory default setting.