Miele PG 8056 Скачать руководство пользователя страница 74

Страница: 74 / 124

Additional settings

Code

A PIN code can be used to prevent unauthorized access to various
functions and system settings on the Commercial Dishwasher.



Select the

Additional settings

menu.



Select

Code

and press

to open the relevant menu.

–

Release

Restrict access to the

Additional settings

menu to users with

administrative rights only, or allow access to all users.

–

Change code

Set a new PIN code.

Release



Select the

Release

option and confirm your choice with the

button.



Select

Additional settings

and confirm your choice with the

button.

The following settings are available:

Additional settings

Yes

Block

(

–

Yes

The menu is available to all users.

–

Block

Access to the menu is only possible with a PIN code.

A check



indicates the current setting.



Select the appropriate option and confirm your selection with the

button.

Changing the PIN
code



Select the

Change code

option and confirm your choice with the

button.



First enter the current PIN code (see “Entering the PIN code”).



Then enter a new PIN code.



Save the new PIN code by confirming the last digit.

Содержание PG 8056





























































































































Результаты поиска

Содержание PG 8056

Отзывы:

Miele PG 8056, Руководство по эксплуатации, Страница: 74 / 124

Результаты поиска

Содержание PG 8056

Отзывы: