Miele PG 8056 Скачать руководство пользователя страница 64

Страница: 64 / 124

Settings



Venting DOS modules

This option is only visible when a DOS module is connected.

The dispensing system for liquid agents can only dispense reliably if
the system has been purged of air.

The DOS system must be vented if:

– it is being used for the first time.

– the liquid cleaning agent container has been replaced,

– the dispensing system has been sucked completely dry.



To avoid damage to the dispensing system, make sure before

venting that the detergent and rinse aid containers are adequately
filled and that the dispensing siphons are screwed securely to the
containers.



Select the

Settings 

menu.



Select

DOS priming

and confirm your choice with the

button.

DOS priming

DOS1

DOS4



Select the dispensing system to be vented using the



and



arrow buttons and confirm your choice with the

button.

The dishwasher will then begin automatically venting the selected
dispensing system. Once this process is complete,

Dispensing system

successfully primed

will appear in the display.



Press the

button to acknowledge the message.

Содержание PG 8056





























































































































Результаты поиска

Содержание PG 8056

Отзывы:

Похожие инструкции для PG 8056

Бренды по названию

Популярные бренды

Miele PG 8056, Руководство по эксплуатации

Результаты поиска

Содержание PG 8056

Отзывы:

Похожие инструкции для PG 8056

Бренды по названию

Популярные бренды