Additional functions
56
Delay Start
You can schedule the start time of a program in advance. The start
time can be delayed by 1 minute to 24 hours.
The Delay Start function must be enabled in the Settings menu (see
“Settings
, Delay Start”).
If Delay Start is disabled, the function will not appear in the
“Additional functions” screen.
When using the Delay Start function together with powder
detergent, make sure that the detergent dispenser is dry before
adding the detergent. Wipe dry with a cloth if necessary.
If the compartment is wet, detergent can clump up and stick to the
dispenser, which may prevent the detergent from being fully
dispensed.
Setting the
start time
Turn the dishwasher on using the
button.
Select the desired program (see “Operation, Selecting a program”).
The LED for the
Start/Stop
button will flash.
Press the
OK
button.
Start time
-- : --
Use the arrow buttons
(higher) and
(lower) to set the hours and
minutes, and confirm each entry using the
OK
button.
After entering the start time, press the
Start/Stop
button.
Universal
Temperature
55 °C
12:30
Turn on at
The selected program, along with the temperature and start time, will
then be displayed.
To cancel the entered Delay Start setting before the program starts,
turn the dishwasher off using the
button.
